Name *

First Name

Last Name

1. What is the best way to prevent injuries and accidents? * *

A. Only use methods and processes you are confident about and avoid using tools, methods or processes that you are unsure of

B. Awareness of self and others; make sure you set up so you can work safe and others can work safely around you

C. Ask Monitor for safety refresher/suggestions

D. Review posted notices about required and recommended PPE

E. All of the above

2. What personal clothing is required to work in ALL CIADC Shops? * *

A. Polyester/rayon (synthetic) stretch tracksuit

B. Natural fibers (cotton, wool), long pants, closed-toe shoes while working in ALL Departments – YES, even in hot weather!

C. Shorts and a tank top

D. Sandals

3. If someone is injured in the Shop, what is the best thing to do? * *

A. Stay with the injured person, and notify the front desk

B. Treat minor injuries with the 1st aid kit

C. Call 911 for injuries greater than minor; CIADC’s address is on the 1st aid kit

D. All of the above

4. What should you do if you encounter equipment, PPE, or tool that is not working or is unusable?* *

A. Nothing. Someone else will notice the scratched face shield, torn jacket, worn out angle grinder cord…

B. Do not use the tool or gear, and notify the Monitor immediately

C. Try to fix it myself

D. Toss it without saying anything

5. True or False: To keep users safe in the metal shop, CIADC provides the following PPE: safety glasses, clear face shield, #5 welding shade, #9-13 welding shade, flame retardant jacket, and hearing protection (earmuff-style and foam ear plugs)* *

A. True

B. False

6. When shutting down a welding station or the forge, how do you know you have bled the gas tank(s) properly?* *

A. There is a puddle under the tank

B. The needles on all gauges are at 0

C. There is a bell that chimes when it’s ready

D. Have your table mate do it

7. What do we do to ensure our worktable tops stay in good condition?* *

A. Grab a piece of sheet metal from the rack to cover the top of your table

B. The last person finished cleans all the tables after class

C. When MIG welding, use Anti-Spatter Spray to minimize spatter, and use a chipping hammer and MIG file to clean the table top afterwards

D. Bribe the monitor to clean it for you

8. Which items can be purchased from supplies in the metal shop? * *

A. Sheet metal by the square foot

B. Bar stock by the linear foot

C. Finishing disks, TIG welding supplies, MIG spool gun tips, plasma cutting tips, gloves, and N95 masks

D. Patinas and Clear Coat

E. All of the above

9. How should you store items such as solvents, paints, or sprays?* *

A. In the Yellow Flammables Cabinet in the Finishing Room, labeled with your name

B. Take them with you and bring them back every time you come to the shop

C. In your personal cubby, wrapped in a baggie

D. In the bathroom, since the air freshener spray is in there

10. When you are setting up a disk on the angle grinder, how can you check if it is done correctly?* *

A. Turn it on and give it a try—if it looks good, it probably is

B. This is a trick question—they are all assembled the same way

C. Check the color-coded info-graphic to the right of the shelf that shows how washers, backing pads and nuts are stacked with each type of disk

D. What's an angle grinder?

11. What should you always do 10-15 minutes before you leave OSA?* *

A. Put tools, material, projects, and scrap away in designated areas

B. Sweep floors (Individual and common work areas)

C. Wipe off worktables and clean spatter after using MIG welders

D. All of the above

12. Examples of "Shop Culture" include:* *

A. Putting tools and PPE away properly and treating clean-up time as part of OSA time so that everyone can be successful in our group shop environment

B. Songs about welding

C. Wearing welding jackets as a fashion statement

D. Metalworking history such as: vice grips were invented by a one-armed blacksmith